| ... | ... | @@ -954,14 +954,13 @@ Résultat de l’action : ![image](uploads/5b4f75885bf4940edfbb2f491f754e51/imag |
|
|
|
- **Center distance** : distance between the extrusion axes of the profile in the fill
|
|
|
|
- **Position point** : Point defined on the profile section - corresponds to the position on the axis
|
|
|
|
- **Starting position** : Defined way to calculate the distribution of the profiles in the mesh
|
|
|
|
Left end
|
|
|
|
Center
|
|
|
|
Right end
|
|
|
|
|
|
|
|
-Note:
|
|
|
|
* In the Left End case: The distribution is calculated from the left of the fill, the residual of the profile distribution is on the right.
|
|
|
|
* In the Center case: The distribution is calculated from the center of the mesh, the residual of the profile distribution is identical on the left and right
|
|
|
|
* In the case of Right End: The distribution is calculated from the right of the filling, the residue of the distribution of profiles is on the left
|
|
|
|
- Left end
|
|
|
|
- Center
|
|
|
|
- Right end
|
|
|
|
-Note:
|
|
|
|
* In the Left End case: The distribution is calculated from the left of the fill, the residual of the profile distribution is on the right.
|
|
|
|
* In the Center case: The distribution is calculated from the center of the mesh, the residual of the profile distribution is identical on the left and right
|
|
|
|
* In the case of Right End: The distribution is calculated from the right of the filling, the residue of the distribution of profiles is on the left
|
|
|
|
- **Minimum space** : distance from the distribution residual for which a position for a new profile extrusion axis should not be calculated
|
|
|
|
- Remark: The minimum space should not be larger than the center-to-center distance
|
|
|
|
- **Assembly** : Defines the method of calculating the assembly on the edges of the mesh
|
| ... | ... | @@ -998,14 +997,12 @@ Example : Case of a filling by profile defined from the variables of the article |
|
|
|
The profile is defined in a variable of type "list of articles", the other parameters are defined by the user (variables defined in the article of filling by profiles)
|
|
|
|
|
|
|
|
**ATTENTION** :
|
|
|
|
|
|
|
|
The profile fill action does not create a bar - so it is not possible to extrude additional profiles using the stacking procedure associated with the bar/blade profile defined in the fill action.
|
|
|
|
This stacking procedure can only be used to add items, accessories at the end of the profile,
|
|
|
|
|
|
|
|
For the installation of additional profiles, it is necessary to work with an additional profile filling action that will be used for the installation of the profiles
|
|
|
|
|
|
|
|
in case of using profile filling delimited by a line - the program searches for the line on all bars crossed by the filling profile and the calculation of intersection is performed at the first encountered occurrence of this line - therefore it is advisable to define this line on a dummy which can be placed on a profile stack according to user's choice
|
|
|
|
when using a profile filling delimited by a line - the variables defined in the profile filling article are not necessarily accessible on the bar supporting the filling stop line (PF.variable_xxxx ) - however, some variables can be useful to define the exact position of the stop line (for example the choice of decorative end caps which cause a greater or lesser indentation in relation to the position defined by the user). It is therefore necessary to associate these variables to a location that is accessible by all parts of the parameterization (to the construction model of the frame or the sash) - which also implies that the information is identical on all parts of the gate that use this profile filling - regardless of the mesh that integrates this filling!
|
|
|
|
|
|
|
|
--------------------------------------------------------------
|
|
|
|
|
|
|
|
**`Surface definition point action`** <a name="Surfacedefinitionpointaction"></a>
|
| ... | ... | |
