HWPS-Actions.md

@@ -456,12 +456,14 @@ Assembly action allowing a profile to abut on the face of another; the face bein
      - Parameter value: This parameter specifies whether the parameter value specified above is 
  used to identify the profile(s) of bar 1 
           - Values: 
+          
            Do not use the parameter value
            Uses parameter value
 
      - Parameter value: This parameter specifies whether the parameter value specified above is 
  used for the identification of the profile of bar 2
          - Values : 
+         
          Do not use the parameter value
          Uses the parameter value
 
@@ -479,31 +481,31 @@ Assembly action allowing a profile to abut on the face of another; the face bein
  Choice of profiles for the action according to the mesh index :
 
  Operating principle
- - For the bar which undergoes the action (bar index1): 
+     - For the bar which undergoes the action (bar index1): 
 
-   If the mesh index = -1 
-   The program scans the bar for profiles extruded on the bar and containing the line 
-   specified in the parameter.
+     If the mesh index = -1 
+     The program scans the bar for profiles extruded on the bar and containing the line 
+     specified in the parameter.
 
-   If the mesh index < > -1
-   The program scans the bar looking for profiles extruded at the mesh, whose index is 
-   specified in parameter, and at the bar, and which contain the line specified in 
-   parameter.
+     If the mesh index < > -1
+     The program scans the bar looking for profiles extruded at the mesh, whose index is 
+     specified in parameter, and at the bar, and which contain the line specified in 
+     parameter.
 
 All profiles found will be affected by the action
 
- - For the bar containing the profile for the stop plane (bar index 2):
+    - For the bar containing the profile for the stop plane (bar index 2):
 
-  If the mesh index = -1 
-  The program scans the bar for a profile extruded to the bar and containing the line 
-  specified in the parameter.  The program takes the first profile found (from parents to 
-  children)
+    If the mesh index = -1 
+    The program scans the bar for a profile extruded to the bar and containing the line 
+    specified in the parameter.  The program takes the first profile found (from parents to 
+    children)
 
- If the index of the mesh < > -1
- The program scans the bar for a profile extruded to the mesh, whose index is specified  
- in parameter, and which contains the line.  The program takes the first profile found. 
- If no mesh profile contains the line, the program scans the extruded profiles at the 
- bar.
+    If the index of the mesh < > -1
+    The program scans the bar for a profile extruded to the mesh, whose index is specified  
+    in parameter, and which contains the line.  The program takes the first profile found. 
+    If no mesh profile contains the line, the program scans the extruded profiles at the 
+    bar.
 
 - Example : Assembly of the crossbar on the frame
             Assembly of the sash profile