HWPS-Actions.md

@@ -183,52 +183,53 @@ When creating a new object of type Action, one must first choose the type of act
  ![image](uploads/3e89e5a84ee34fd06bebc2a813794857/image.png)
     - Situation where the index of bar 1 is the chevron
   
- ![image](uploads/38b771a1d42ed20ae94100be86ab8df2/image.png)
+  ![image](uploads/38b771a1d42ed20ae94100be86ab8df2/image.png)
 
-  - Profile Point: the point on a profile in bar 1 where the position point of the profile piece will come to rest.
+     - Profile Point: the point on a profile in bar 1 where the position point of the profile 
+     piece will come to rest.
 
-  - Bar index 2: Bar index in the node to position the end 1 of the profile piece.  
+     - Bar index 2: Bar index in the node to position the end 1 of the profile piece.  
     The end 1 of the profile to be extruded over a length will be positioned at the intersection 
     of the bar 1 point and the bar 2 line
 
-  - Profile Line: line of a profile from bar two allowing the positioning of the profile to be 
+    - Profile Line: line of a profile from bar two allowing the positioning of the profile to be 
      extruded.
 
-  - End: Allows you to define the extrusion direction of the profile piece.
+    - End: Allows you to define the extrusion direction of the profile piece.
 
          - Situation 1: The assembly node corresponds to the end 1 or 2 of bar 1: It is mandatory 
          to fill in the actual end of bar 1.
-![image](uploads/8433457c03ff94a07f9cbe2515b566f5/image.png)
+   ![image](uploads/8433457c03ff94a07f9cbe2515b566f5/image.png)
   
-  - Mesh index: allows the profile to be associated with a mesh
+    - Mesh index: allows the profile to be associated with a mesh
 
-  - Position point: insertion point of the profile that will be extruded over a certain 
-  length
+    - Position point: insertion point of the profile that will be extruded over a certain 
+    length
 
-   - DX : displacement along the X axis
+    - DX : displacement along the X axis
 
-   - DY : displacement along the Y axis
+    - DY : displacement along the Y axis
 
-   - DZ : displacement along the Z axis
+    - DZ : displacement along the Z axis
 
-   - RX : rotation along the X axis
+    - RX : rotation along the X axis
 
-   - RY : rotation along the Y axis
+     - RY : rotation along the Y axis
 
-   - RZ : rotation along the Z axis
+     - RZ : rotation along the Z axis
 
-    - Order of rotations: 
+     - Order of rotations: 
 
-    - Vertical mirror : vertical symmetry of the profile section
+     - Vertical mirror : vertical symmetry of the profile section
 
-    - Horizontal mirror : horizontal symmetry of the profile section
+     - Horizontal mirror : horizontal symmetry of the profile section
 
-    - Parameterization value: value associated with the profile extruded by this action. This 
+     - Parameterization value: value associated with the profile extruded by this action. This 
      value 
-  can be tested later in the parameterization to differentiate profiles that are identical but 
-  should have a different behavior
+    can be tested later in the parameterization to differentiate profiles that are identical but 
+    should have a different behavior
 
-   - Length : formula for the length of the profile
+    - Length : formula for the length of the profile
 --------------------------------------------------------------
 
 **`Profile position`** <a name="Profileposition"></a>