HWPS-Actions.md

@@ -438,9 +438,9 @@ Assembly action allowing a profile to abut on the face of another; the face bein
 
     
 
-    - Parameterization value: possibility to identify the profile(s) of bar 1 to undergo the 
-    action (in addition to the identification line) by specifying 'the parameterization value of 
-    the positioned profile action
+     - Parameterization value: possibility to identify the profile(s) of bar 1 to undergo the 
+     action (in addition to the identification line) by specifying 'the parameterization value of 
+     the positioned profile action
 
      - Parameterization value: possibility to identify the profile of bar 2 serving as reference 
      for the stop action (in addition to the stop line) by specifying the parameterization value 
@@ -453,71 +453,67 @@ Example : when type of plane following the line and a negative Distance D :
          
 ![image](uploads/ebc19bc55754dcc38c31265a9ab7611a/image.png)
 
+   ```
     - Parameter value: This parameter specifies whether the parameter value specified above is 
-    used to identify the profile(s) of bar 1 
+used to identify the profile(s) of bar 1 
 
         - Values: 
 
-            Do not use the parameter value
+        Do not use the parameter value
 
-            Uses parameter value
+        Uses parameter value
 
     - Parameter value: This parameter specifies whether the parameter value specified above is 
-    used for the identification of the profile of bar 2
+used for the identification of the profile of bar 2
 
         - Values : 
 
-            Do not use the parameter value
+        Do not use the parameter value
 
-            Uses the parameter value
+        Uses the parameter value
 
     - Mesh index: Index of the mesh in the node 
 
-         - Values: 
-
-             * from 0 to n.meshcount-1 : when one of the profiles concerned by the action is 
-             extruded on a mesh (in other words, in the positioned profile action, the "extrusion" 
-             parameter is mesh1 or mesh2) it is necessary to indicate on which mesh in the node 
-             the profile is located.
+      - Values: 
 
-             * -1 : when the profiles concerned by the action are all extruded at the bar (no 
-           notion of mesh).
-     
-     Note: Stop action:
-     Choice of profiles for the action according to the mesh index :
+         * from 0 to n.meshcount-1 : when one of the profiles concerned by the action is 
+         extruded on a mesh (in other words, in the positioned profile action, the "extrusion" 
+         parameter is mesh1 or mesh2) it is necessary to indicate on which mesh in the node 
+         the profile is located.
 
-     Operating principle
-     - For the bar which undergoes the action (bar index1): 
+         * -1 : when the profiles concerned by the action are all extruded at the bar (no 
+       notion of mesh).
  
-       If the mesh index = -1 
-       The program scans the bar for profiles extruded on the bar and containing the line 
-       specified in the parameter.
+ Note: Stop action:
+ Choice of profiles for the action according to the mesh index :
 
-       If the mesh index < > -1
-       The program scans the bar looking for profiles extruded at the mesh, whose index is 
-       specified in parameter, and at the bar, and which contain the line specified in 
-       parameter.
+ Operating principle
+ - For the bar which undergoes the action (bar index1): 
 
-    All profiles found will be affected by the action
+   If the mesh index = -1 
+   The program scans the bar for profiles extruded on the bar and containing the line 
+   specified in the parameter.
 
-     - For the bar containing the profile for the stop plane (bar index 2):
- 
-      If the mesh index = -1 
-      The program scans the bar for a profile extruded to the bar and containing the line 
-      specified in the parameter.  The program takes the first profile found (from parents to 
-      children)
-
-     If the index of the mesh < > -1
-     The program scans the bar for a profile extruded to the mesh, whose index is specified  
-     in parameter, and which contains the line.  The program takes the first profile found. 
-     If no mesh profile contains the line, the program scans the extruded profiles at the 
-     bar.
-       
-- Example : Assembly of the crossbar on the frame
-           Assembling the sash profile
-           in progress 
+   If the mesh index < > -1
+   The program scans the bar looking for profiles extruded at the mesh, whose index is 
+   specified in parameter, and at the bar, and which contain the line specified in 
+   parameter.
+
+All profiles found will be affected by the action
+
+ - For the bar containing the profile for the stop plane (bar index 2):
 
+  If the mesh index = -1 
+  The program scans the bar for a profile extruded to the bar and containing the line 
+  specified in the parameter.  The program takes the first profile found (from parents to 
+  children)
 
+ If the index of the mesh < > -1
+ The program scans the bar for a profile extruded to the mesh, whose index is specified  
+ in parameter, and which contains the line.  The program takes the first profile found. 
+ If no mesh profile contains the line, the program scans the extruded profiles at the 
+ bar.
+```
     
 
 --------------------------------------------------------------