HWPS-Actions.md

@@ -443,9 +443,9 @@ Assembly action allowing a profile to abut on the face of another; the face bein
  
 - Example : when type of plane following the line and a negative Distance D :
  
-![image](uploads/2c0eea253a7e7f6921aa4f153069c007/image.png)
+        ![image](uploads/2c0eea253a7e7f6921aa4f153069c007/image.png)
 
-     - Parameter value: This parameter specifies whether the parameter value specified above is used to identify the profile(s) of bar 1 
+    - Parameter value: This parameter specifies whether the parameter value specified above is used to identify the profile(s) of bar 1 
 
         - Values: 
 
@@ -465,38 +465,41 @@ Assembly action allowing a profile to abut on the face of another; the face bein
 
          - Values: 
 
-             * 0 to n.meshcount-1: when one of the profiles concerned by the action is extruded on 
-        a mesh (in other words, in the positioned profile action, the "extrusion" parameter is 
-        mesh side1 or mesh side2) it is necessary to indicate on which mesh in the node the 
-        profile is located.
+             * from 0 to n.meshcount-1 : when one of the profiles concerned by the action is 
+             extruded on a mesh (in other words, in the positioned profile action, the "extrusion" 
+             parameter is mesh1 or mesh2) it is necessary to indicate on which mesh in the node 
+             the profile is located.
 
              * -1 : when the profiles concerned by the action are all extruded at the bar (no 
            notion of mesh)
-Note: Stop action:
+     Note: Stop action:
+     Choice of profiles for the action according to the mesh index :
 
- Choice of profiles for the action according to the mesh index :
-
- Operating principle
+     Operating principle
  
- 1.For the bar which undergoes the action (bar index1): 
- If the mesh index = -1 
- The program scans the bar for profiles extruded on the bar and containing the line specified in 
- the parameter.
+       1.For the bar which undergoes the action (bar index1): 
+       If the mesh index = -1 
+       The program scans the bar for profiles extruded on the bar and containing the line 
+       specified in the parameter.
 
- If the mesh index < > -1
-The program scans the bar looking for profiles extruded at the mesh, whose index is specified in parameter, and at the bar, and which contain the line specified in parameter.
+  If the mesh index < > -1
+  The program scans the bar looking for profiles extruded at the mesh, whose index is specified in 
+  parameter, and at the bar, and which contain the line specified in parameter.
 
  
 All profiles found will be affected by the action
 
  
-2.For the bar containing the profile for the stop plane (bar index 2):
-
- If the mesh index = -1 
-The program scans the bar for a profile extruded to the bar and containing the line specified in the parameter.  The program takes the first profile found (from parents to children)
-
-If the index of the mesh < > -1
-The program scans the bar for a profile extruded to the mesh, whose index is specified in parameter, and which contains the line.  The program takes the first profile found.  If no mesh profile contains the line, the program scans the extruded profiles at the bar.
+      2.For the bar containing the profile for the stop plane (bar index 2):
+      If the mesh index = -1 
+      The program scans the bar for a profile extruded to the bar and containing the line 
+      specified in the parameter.  The program takes the first profile found (from parents to 
+      children)
+
+  If the index of the mesh < > -1
+  The program scans the bar for a profile extruded to the mesh, whose index is specified in 
+  parameter, and which contains the line.  The program takes the first profile found.  If no mesh 
+  profile contains the line, the program scans the extruded profiles at the bar.
 
 - Example : Assembly of the crossbar on the frame
            Assembling the sash profile