HWPS-Actions.md

@@ -321,9 +321,58 @@ By default, the chosen point is the MRS point "Position point".
 
 **`bevel`** <a name="bevel"></a>
 - [return to action list](#TopList)
-- Definition
-- Use case
-- Parameters
+- Definition : Bevel between two profiles (mitering)
+The bevel action is an assembly action that allows to make bevels between two profiles.
+
+![image](uploads/f4e0720940f1beb6f87d50f373d0e4bc/image.png)
+
+- Use case : Assembly procedure
+- Parameters : 
+   - Index of Bar 1: index of the first bar involved in the beveling action in the assembly node
+
+   - Line 1 of profile 1: first line to identify profile 1
+
+   - Line 2 of profile 1: second line to identify profile 1
+
+   - Parameterization value : (Optional) Value to identify the profile defining the bevel line on bar 1
+
+   - Parameterization value : If defined with the value 'use parameterization value' the previous parameter is taken into account to identify the reference profile on bar 1
+
+   - Mesh index: 
+
+        - Values: 
+
+             * -1 if the profiles concerned by the action are extruded to the bar
+
+             * 0, 1, 2, 3, ... mesh index in the node if at least one of the profiles concerned by 
+    the action is extruded to the mesh
+
+   - Index of Bar 2: index of the second bar affected by the bevel action in the node
+
+   - Line 1 of profile 2: first line to identify profile 2
+
+   - Line 2 of profile 2: second line to identify profile 2
+
+   - Parameterization value : (Optional) Value to identify the profile defining the reference line on bar 2
+
+  - Parameterization value : If defined with the value 'use parameterization value' the previous parameter is taken into account for identifying the reference profile on bar 2
+
+  - Mesh index 2: 
+
+       - Values: 
+
+           * -1 if the profiles concerned by the action are extruded to the bar
+
+           * 0, 1, 2, 3, ... mesh index in the node if at least one of the profiles concerned by 
+       the action is extruded to the mesh          
+
+  - Type of assembly: defines whether the bevel is of the welding type (PVC profiles ) or not 
+
+      - Values: 
+
+          * 0 if the profiles concerned by the action are not welded (do not require extra length) 
+
+          * 1 if the profiles concerned by the action are welded (require an extra length)
     
 
 --------------------------------------------------------------