HWPS-Actions.md

@@ -715,7 +715,7 @@ Definition of the target by the parameters of bars 2 and 3 :
 ![image](uploads/813c05a17f609a8bde4f19628503e58c/image.png)
 Definition of the line of sight by the parameters of bar 1, result:
 ![image](uploads/bdbf0d20b21e656354bbf66916919b33/image.png)
-   - Note: The offset does not apply to the bar itself.  The wire volume is not modified, only the whole of the profiles of the bar is misaligned.
+Note: The offset does not apply to the bar itself.  The wire volume is not modified, only the whole of the profiles of the bar is misaligned.
  
 
 --------------------------------------------------------------
@@ -744,15 +744,14 @@ Definition of the line of sight by the parameters of bar 1, result:
 - Use case : Assembly procedure
 - Parameters : 
 ![image](uploads/a2d7bc45f6e0b582fb83ca70ba30d5a7/image.png)
-
 The first 5 parameters define the profile(s) receiving the cuts:
+
     - **Bar index** : bar index of the profile(s) receiving the cuts
     - **Profile identification by line** : Line allowing to identify the profile(s) of the bar to undergo the stop action
     - **Profile mesh** : Mesh index of the considered profile
     - **Parameterization value** : (Optional) Parameterization value of the profile
     - **Parameterization value** : If defined with the value 'use parameterization value' the previous parameter is taken into account for the identification of the reference profile on bar 1
-    
- In groups of 5 parameters, the following fields define the different cuts of the profile to be made: 
+     In groups of 5 parameters, the following fields define the different cuts of the profile to be made: 
     - **Bar index** : Index of the bar containing the profile that defines the cut via the line on its section
    - **Profile identification by line** : Line on the section of a profile of the bar defining the cutting plane
    - **Profile mesh** : Mesh index of the considered profile