| ... | ... | @@ -1608,25 +1608,25 @@ since 2.1 |
|
|
|
|
|
|
|
- Use case : Assembly procedure
|
|
|
|
- Parameters :
|
|
|
|
- **Machining** : Selection of the machining to be placed at the node
|
|
|
|
- **Bar index 1** : Identification in the node of the reference bar for positioning the machining
|
|
|
|
- **Machining** : Selection of the machining to be placed at the node
|
|
|
|
- **Bar index 1** : Identification in the node of the reference bar for positioning the machining
|
|
|
|
- Value: >=0
|
|
|
|
- **Profile point** : Point of a profile on which the machining marker will be positioned.
|
|
|
|
- **Parameterization value** : (Optional) Value that can be used to identify the profile that defines the reference point on bar 1
|
|
|
|
- **Parameterization value** : If defined with the value 'use parameterization value' the previous parameter is taken into account for the identification of the profile that will support the machining
|
|
|
|
- **Index of bar 2** : (Optional)
|
|
|
|
- **Profile point** : Point of a profile on which the machining marker will be positioned.
|
|
|
|
- **Parameterization value** : (Optional) Value that can be used to identify the profile that defines the reference point on bar 1
|
|
|
|
- **Parameterization value** : If defined with the value 'use parameterization value' the previous parameter is taken into account for the identification of the profile that will support the machining
|
|
|
|
- **Index of bar 2** : (Optional)
|
|
|
|
- Default value: -1
|
|
|
|
- Convention: see below
|
|
|
|
- **Profile line** : (Optional) Possible line of a profile located on the bar of index 2 and allowing to determine the insertion point with the point of bar 1 to create the machining marker.
|
|
|
|
- **Parameterization value** : (Optional) Value that may be used to identify the profile defining the reference line on bar 2.
|
|
|
|
- **parameterization value** : If defined with the value 'use parameterization value' the previous parameter is taken into account for the identification of the reference profile on bar 2
|
|
|
|
- **Index of bar 3** : Identification of the bar in the reference node of the machined profile
|
|
|
|
- **Profile line** : (Optional) Possible line of a profile located on the bar of index 2 and allowing to determine the insertion point with the point of bar 1 to create the machining marker.
|
|
|
|
- **Parameterization value** : (Optional) Value that may be used to identify the profile defining the reference line on bar 2.
|
|
|
|
- **parameterization value** : If defined with the value 'use parameterization value' the previous parameter is taken into account for the identification of the reference profile on bar 2
|
|
|
|
- **Index of bar 3** : Identification of the bar in the reference node of the machined profile
|
|
|
|
- Value: >=0
|
|
|
|
- **Identifying line of the machined profile** : Line of a profile that is on the bar with index 3 undergoing machining.
|
|
|
|
- **Parameterization value** : (Optional) Value that can be used to identify the profile undergoing machining on the index bar 3.
|
|
|
|
- **Parameterization value** : If defined with the value 'use parameterization value' the previous parameter is taken into account for the identification of the reference profile on bar 3
|
|
|
|
- **DZ** : displacement relative to the calculated point along the Z axis.
|
|
|
|
- **Additional value** : not used
|
|
|
|
- **Identifying line of the machined profile** : Line of a profile that is on the bar with index 3 undergoing machining.
|
|
|
|
- **Parameterization value** : (Optional) Value that can be used to identify the profile undergoing machining on the index bar 3.
|
|
|
|
- **Parameterization value** : If defined with the value 'use parameterization value' the previous parameter is taken into account for the identification of the reference profile on bar 3
|
|
|
|
- **DZ** : displacement relative to the calculated point along the Z axis.
|
|
|
|
- **Additional value** : not used
|
|
|
|
- Conventions :
|
|
|
|
|
|
|
|
- The x-axis of the article marker = the direction of bar 1 in the extrusion direction from 1 to 2
|
| ... | ... | @@ -1638,6 +1638,7 @@ since 2.1 |
|
|
|
Note: If parameter index of bar 2 = -1, the insertion point of the item becomes the intersection of the profile point of bar 1 and its end plane.
|
|
|
|
|
|
|
|
- Availability/Updates : V2.0.1.131
|
|
|
|
|
|
|
|
--------------------------------------------------------------
|
|
|
|
|
|
|
|
**`Machining action with fixed repetition`** <a name="Machiningactionwithfixedrepetition"></a>
|
| ... | ... | |
